|
A1 12MM 94-98 Dodge 5.9L 12V Cummins Cylinder Head Stud Kit - [1054007]
These studs are made from 4340 material and have a black oxide finish, 190 ksi min.
Made By A1 Technologies
Studs hold up to 80PSI of boost!
STUD SETS INCLUDE:
- 26 STUDS, NUTS & WASHERS
- ARP MOLY LUBE
- INSTRUCTIONS
All kits include 26 studs, nuts, 12pt nuts, assembly lube and instructions.
Compare to ARP Stud Specifications!
|
$548.88
|
|
|
A1 14MM 94-98 Dodge 5.9L 12V Cummins Cylinder Head Stud Kit - [1054007XHD]
These extra heavy duty 14mm XHD studs are made from H-11 and have a glass bead finish, 220 ksi min.
Made By A1 Technologies
Studs hold 80PSI+ Boost!
STUD SETS INCLUDE:
- 26 STUDS, NUTS & WASHERS
- ARP MOLY LUBE
- INSTRUCTIONS
XHD head studs are 14mm and require that you drill and tap the block and ream the head.
We recommend that this procedure be done by a qualified machine shop.
All kits include 26 studs, nuts, 12pt nuts, assembly lube and instructions.
Picture is of 12mm studs and is only to serve as a representation.
|
$790.99
|
|
|
12- 60lb Intake & Exhaust Valve Springs 94-98 12V Dodge Cummins - [2 PB-C14010]
12 60lb Intake & Exhaust Valve Springs 94-98 12V Dodge Cummins
|
Image Not Available
$119.00
|
|
|
P7100 Injection Pump Delivery Valve Socket - [310SP5030]
Delivery Valve Socket For Installing or Removing the delivery valves on a P7100 Injection Pump
|
Image Not Available
$59.29
|
|
|
94-98 12 Valve Dynomite Diesel 140hp Stage 4 Injectors DDP4 - [9498B140]
140hp Stage 4 Injectors for the 1994-1998 Dodge 12 Valve Cummins by Dynomite Diesel Performance DDP4
Without Exception "The best" 12 Valve injector! Just ask Lenny Reed, Big Bad Dodge, Richard "Maddog" Madsen, Garrett Shields and many more!
These injectors utilize extrude hone technology.
|
$899.00
|
|
|
94-98 12 Valve Dynomite Diesel 90hp Stage 3 Injectors DDP3 - [9498B90]
90hp Stage 3 Injectors for the 1994-1998 Dodge 12 Valve Cummins Turbo Diesel DDP3. By Dynomite Diesel Performance
The medium version of "The Best" 12 valve injector available.
These injectors utilize extrude hone technology.
|
$699.00
|
|
|
94-98 12 Valve Dynomite Diesel 75hp Stage 2 Injectors DDP2 - [9498B75]
75hp Stage 2 Injectors for the 1994-1998 Dodge 12 Valve Cummins Turbo Diesel. By Dynomite Diesel Performance
Our smallest version of "The Best" 12 valve injector available.
These injectors utilize extrude hone technology.
|
$499.00
|
|
|
Bosch 215 Factory Injectors 94-98 Dodge 12V Cummins - [PDR2210215-K]
- Bosch 215 Factory Marine injectors for the 1994-1998 Dodge 12 valve cummins turbo diesel.
- Will add up to 60hp depending on the injection pump, and cam plate installed.
- Low to Medium smoke levels.
- Great RV injectors for towing and mild horsepower upgrades.
All horsepower levels are approximate increases compared to stock injectors. Other fuel and air flow modifications will change your expected power increases. Smoke levels are relative to turbo and other air flow modifications.
These values are listed primarily to allow customers to compare performance levels of different injectors, so they can better choose the right ones for their needs. A set of 370 injectors may produce much higher smoke levels on a stock turbo compared to a set of twins. But for the same turbo/air flow setup a set of 215's will produce "lower" smoke levels compared to 370's which will produce "medium to high" levels for the same setup.
Our performance injectors are sold as a matched and balanced set, and include a full installation kit.
|
$499.00
|
|
|
Bosch 370 Diamond B Marine Injectors 94-98 12V Dodge Cummins - [PDR2210370-K]
- 370 Marine injectors for the 1994-1998 Dodge equipped with the 12 valve cummins turbo diesel.
- Will add up to 100hp depending on the injection pump, and cam plate installed.
- Capable of supporting massive hp with supporting mods.
- Medium to High Smoke Levels
- Great mid to high horsepower application. Will roll the smoke when wanted!
All horsepower levels are approximate increases compared to stock injectors. Other fuel and air flow modifications will change your expected power increases. Smoke levels are relative to turbo and other air flow modifications.
These values are listed primarily to allow customers to compare performance levels of different injectors, so they can better choose the right ones for their needs. A set of 370 injectors may produce much higher smoke levels on a stock turbo compared to a set of twins. But for the same turbo/air flow setup a set of 215's will produce "lower" smoke levels compared to 370's which will produce "medium to high" levels for the same setup.
Our performance injectors are sold as a matched and balanced set, and include a full installation kit.
|
$429.00
|
|
|
Dodge 12V Cummins Quickspool HTPM Pulse Exhaust Manifold - [EM12]
The new 3-piece pulse manifold for the 1988-1998 Dodge 12 Valve Cummins
- Made in USA form high silicone ductile iron (SHOT PEENED)
- Provides faster spool-up than stock or competitive manifolds. A perfect match for our quickspool turbos.
- Lowers EGT's
- Great for stock replacement or high-flow performance applications
- 12 and 24 valve styles - Port matched for each version.
- Tuned, balanced flow design.
- Nominal wall thickness .300"
- This manifold flows exhaust more evenly than the stock manifold and is not as prone to cracking.
- Unlike competitors, our manifold comes drilled and tapped for a 1/8 pyrometer, and NOW, 1/4 as well (pipe plugs installed).
- Ships ASSEMBLED at no extra charge.
- Unlike competitors, our manifold comes with necessary mounting bolts and heater hose bracket where required
A complete mounting kit is available. The kit includes:
- Head to manifold gaskets
- Manifold to turbo gasket
- Turbo oil drain gasket
- Turbo mounting studs
- Turbo mounting bolts
- Turbo mounting nuts
|
$425.00
|
|
|
High Flow Laser Cut Delivery Valves, 94-98 Dodge 12V Cummins - [P7100DV35KIT]
High Flow Laser Cut Delivery Valves by SCHEID Diesel
For the P7100 Injection Pump found on 94-98 Dodge 12 Valve Cummins Turbo Diesel.
Do you need more fuel for your Dodge 12 valve cummins?
Does your cummins run poorly or after installing large injectors?
Looking for more low end fueling?
These delivery valves have shown gains of 100HP over stock delivery valves.
For installation instructions, click here
|
$299.99
|
|
|
P7100 191 Delivery Valves, 94-98 Dodge 12 Valve Cummins - [PDR2411910-K]
High Flow 191 Delivery Valves. For 1994-1998 P7100 Pumps Found on Dodge 12V Cummins Turbo Diesels.
Do you need more fuel for your Dodge 12 valve cummins? Check out these 191 Delivery Valves. They don't flow as much as laser cuts, but they are a definate improvement over your stock delivery valves!
For installation instructions, click here
|
$279.00
|
|
|
Dodge 94-98 12 Valve Cummins Torque/Cam/Fuel Plate - [PDR251000x]
DFUSER.com carries the complete line of cam plates.
Each kit comes complete with a new fuel curve cam plate, installation template, turbo boost control orifice, a new breakoff screw to replace the one removed, and installation instructions. Fits 1994-1998 12 valve Cummins diesels
| Camplate # |
#12 |
#11 |
#10 |
#8 |
#6 |
#5 |
| Stock Rating |
BPH/ft-lb |
BPH/ft-LB |
BPH/ft-LB |
BPH/ft-LB |
BPH/ft-LB |
BPH/ft-LB |
|
94-95 Automatic
160hp / 400ft-lb
CPL# 1549, 1815, 1959, 1968 |
165/440
|
185/500
|
200/550
|
210/560
|
230/605
|
255/650
( 1 ) |
|
94-95 Manual
175hp / 420ft-lb
96-98 Automatic
180hp / 420ft-lb
CPL# 1550, 1816, 2022, 2174
CPL# 1863 96-98 EGR ( 5 ) |
190/500
|
210/550
|
220/570
|
230/605
|
250/635
|
270/675
( 2 ) |
|
96-98 Manual
215hp / 440ft-lb
CPL# 2023, 2175 |
230/605
|
280/680
|
330/750
( 3, 4 ) |
NR
|
NR
|
NR |
|
Purchase |
|
|
|
|
|
|
* Only Power Ratings up to 230/605 are EPA certified for highway use in North America. Power above 230/605 are shown for competitive applications only.
- Stock 94-95 automatics will not handle this rating
- Stock 96-98 automatics will not handle this rating
- Stock 96-98 clutch will not handle this rating
- Exhaust Gas Temperatures will run hot without airflow improvements
- The California 96 -98 manual and automatic are both EGR engines ( 180hp/420ft-lb ) may not be upgraded to 230/605.
NR = Not Recommended
|
$195.00
Make your selection to the left.
|
|
|
4000 RPM GSK w/ 12 HD valve springs, 94-98 Dodge 12V Cummins - [PDR2614001]
4K RPM Governor Spring Kit
The PDR Governor Spring Kit is a special combination of Bosch springs and Piers' unique design on seats. Includes 12 Heavy Duty Valve Springs. The GSK is designed to allow your pump to rev past factory settings without compromising pump safety.
4000RPM kits required use of heavy duty valve springs. Fits 1994-1998 Dodge 12V Cummins diesels.
|
$249.00
|
|
|
4K GSK RPM Governor Spring Kit 94-98 Dodge 12V Cummins - [PDR2614000]
4K RPM Governor Spring Kit
The PDR Governor Spring Kit is a special combination of Bosch springs and Piers' unique design on seats. The GSK is designed to allow your pump to rev past factory settings without compromising pump safety.
4000RPM kits required use of heavy duty valve springs. Fits 1994-1998 Dodge 12V Cummins diesels.
|
$149.00
|
|
|
3K GSK RPM Governor Spring Kit 94-98 Dodge 12V Cummins - [PDR2613000]
3K RPM Governor Spring Kit
The PDR Governor Spring Kit is a special combination of Bosch springs and Piers' unique design on seats. The GSK is designed to allow your pump to rev past factory settings without compromising pump safety.
Fits 1994-1998 Dodge 12V Cummins diesels.
|
$149.00
|
|
|
GSK Inner Spring Kit, Converts a 3k GSK to a 4k GSK 94-98 12 Val - [pdr2010740x2]
2 Inner Springs to Convert 3k gsk to a 4k gsk.
94-98 Dodge 12 Valve Cummins
|
$29.99
|
