This kit progressively injects more or less water-methanol, according to manifold boost pressure.
The system is applicable for turbo diesels making up to 35psi of boost pressure.
It has two dials to set the start and full points to tailor the delivery to your engines needs.
Progressively injecting according to boost pressure allows for the most power over the widest range of rpms.
Now with Lifetime Warranty - please see details.
This kit works well on stock or very mildly modified Ford Powerstrokes, Dodge Cummins, & Chevy/GM Duramax Diesel Trucks.
Snow Performance Part Number: SN-DS1
Free Shipping Lower 48 United States of America.
Snow Performance Stage II Diesel Boost Cooler
These kits work on exactly the same principle as the Stage 1 kits, except that the controllers are heavier duty and can read up to 100psi of turbo boost.
This is the typical starting point for a mildly modified modern 3/4 or 1 ton truck with an aftermarket exhaust, intake and chip or programmer.
It is capable enough for trucks running large or compound turbo systems as well.
These kits allow for great horsepower increases and EGT reductions – expect about 70hp and 250 degree F EGT drop.
Now with Lifetime Warranty - please see details.
This kit works well on Ford 6.0L & 7.3L Powerstrokes, Dodge 5.9L Cummins, & Chevy/GM 6.6L Duramax Diesel Trucks.
Snow Performance Part Number: SN-DS2
Free Shipping Lower 48 United States of America.
Snow Performance Stage III Diesel Boost Cooler
The Stage 3 Diesel Boost CoolersTM are the most comprehensive water-methanol injection kits Snow Performance makes.
This controller senses not only manifold boost pressure but also exhaust gas temperatures.
Using two inputs allows for the smoothest injection control. More importantly, it also keeps the EGTs as low as possible - if they begin to climb, even if the boost stays constant, the Stage 3 controller will read this and inject more water-methanol to compensate.
Additionally, the controller has readouts for EGT, Boost and Water-Methanol Injection so at a glance you can see what is going on with your engine and not need to mount any additional gauges.
Finally, there is an adjustment knob on the controller to allow tuning changes from the driver's seat on-the-fly.
There is even a switch on the controller to allow it to operate off of just boost pressure (ignoring the EGT input).
This can be advantageous if you want the quickest response if you are at the drag strip or if a sports car pulls up next to you at a stop light.
There are 2 levels of Stage 3 Boost CoolerTM available, one for lower boost (up to 25psi) and one for higher boost (up to 100psi).
Now with Lifetime Warranty - please see details.
This kit works well on Ford 6.0L & 7.3L Powerstrokes, Dodge 5.9L Cummins, & Chevy/GM 6.6L Duramax Diesel Trucks.
Snow Performance Part Number: SN-DS3
Free Shipping Lower 48 United States of America.
If you see it cheaper elsewhere, call us and we'll try to meet or beat the price!
Featured Product
Ultimate Power Package!
For your '99.5-2007 PowerStroke 7.3L or 6.0L
SCT XCAL 3 Programmer, w/Custom Tunes. Adds up to 150 Horse Power, 290 ft-lbs torque!
Fits all 99-Up 7.3L and 6.0L Powerstroke Turbo Diesel Engines (F-250, F-350).
MagnaFlow Stainless T-409 Turbo Back System.
AFE Stage I Cold Air Intake System.
3-Gauge Painted Pillar with Boost, Trans, and EGT Autometer Gauges.
Fully Painted, Pre-assembled and wired (Ultralite, Z-Series, Phantom, or Sport-Comp)
