• ATS High Performance Transmissions are designed to handle heavy loads and high horsepower. When towing extreme loads you need a transmission that delivers positive shifts with out the hard shift that is commonly associated with performance transmissions. All rebuilt ATS high performance transmissions include the following features:
• Our fully rebuilt, dyno tested ATS High Performance Valve Body, High Volume Pump, Heavy Duty Gear Train, Extreme Duty Clutch Pack and other proprietary components.
• Our heavy duty transmission pan to provide increased lube volume, cooling capacity and strengthen the large case from excessive flexing.
• High stress areas of case are reinforced - Reduces chance of stress cracks.
• Critical bolt and thread holes are inserted - Relieves pulled threads or bolts.
• Valve Body surface is machined flat - Ensures against hydraulic leaks.
• The entire hydraulic system is redesigned and calibrated specifically for the Diesel engine, Diesels require a unique calibration to ensure the engine is in it's optimal operation range.
• External surface of case is sealed - Reduces corrosion and fatigue.
• For customers pulling extreme loads or customers with high mileage transmissions, we recommend our high performance rebuilt transmission along with a new Five Star(tm) Torque Converter . When looking for the ultimate in performance, combine our Co-pilot lockup Controller with our HD Transmission and Torque Converter. The ATS Transmission, Five Star Converter, and Co-Pilot electronic transmission module is the ideal setup when using an Exhaust Brake, or with a modified engine. When the Five Star Viscous Clutch Drive torque converter and Co-Pilot are used together the effiency rating of the transmission is increased. This increases MPG in most cases.
• INCLUDES SHIPPING to you and Core Back to ATS in the Lower 48 States
• Core charges shown are half of what you will pay if you decide to purchase your core. If you decide to purchase your core, double the core charge.

$4399.00

• The ATS Five Star¿ is a revolutionary Torque Converter that utilizes all of the technologies of a traditional torque converter plus the innovative ATS Viskus Clutch Drive. The ATS Viskus Clutch Drive is the heart of the ATS Five Star¿ Torque Converter.
• The ATS Viskus Clutch Drive, along with the fluid-coupling portion of the torque converter, share in the increase of transfer of power through the torque converter. Unlike other torque converters relying on fluid transfer from the impeller to the turbine via the stator, the Five Star¿ utilizes ATS Viskus Clutch Drive technology that transfers rotational energy from the engine to the transmission. When the Torque Converter Clutch is commanded to come on, the 5 clutch plates provide a 100% mechanical engagement ensuring no plate slippage during lockup, even at power levels in excess of 2000 foot pounds of torque!
• We're so confident in the Five Star that it is backed by the only 3-year 150,000-mile warranty in the business.
• Some fo the features of the Five Star Torque Converter are:
• Full Billet Steel Construction in place of cheap steel stamping
• 5 Disk friction surface with Patented Square Flank Drive
• Stall speed is perfectly matched to engine torque curve
• Mixed-Flow stator works with Viskus Clutch Drive maximizing torque multiplication
• Fully welded impeller and turbine vane section
• Oversized high load thrust bearings in place of plastic washers
• The ATS Commander© has been developed to provide control over converter lockup in your vehicle. Factory computers are programmed to disengage lockup under many conditions that often inhibits the performance of the transmission. With a Five Star¿ Torque Converter and The ATS Commander© in place, these non-lockup torque converter situations are no longer an issue.
• Stall speed matched to engine torque curve for better acceleration
• No torque converter slippage.
• Lower ATF temperatures.
• Ability to reliably pull or haul heavy loads.
• An excellent replacement for a worn-out torque converter.
• INCLUDES SHIPPING to you and Core Back to ATS in the Lower 48 States
• Core charges shown are half of what you will pay if you decide to purchase your core. If you decide to purchase your core, double the core charge.

$1957.74

• SCT XCAL 3 Programmer, w/Custom Tunes. Adds up to 150 Horse Power, 290 ft-lbs torque!
• Fits all 99-Up 7.3L and 6.0L Powerstroke Turbo Diesel Engines (F-250, F-350).
• MagnaFlow Stainless T-409 Turbo Back System.
• AFE Stage I Cold Air Intake (7.3L) or CFM+ (6.0L).
• 3-Gauge Mount with Boost, Trans, and EGT Autometer Gauges.
  
• Includes Paint, wires, and all fittings (Ultralite, Z-Series, Phantom, or Sport-Comp)
• Free Shipping in the Lower 48 States!
• Choose your paint option HERE.

Now $1,299.99